Potter PFC-6006 - Receiving E-mail Status Reports

5-44
PFC-6006 • 5403559 • REV D • 11/17
Receiving E-mail Status Reports
When a system status (Alarm, Supervisory, Trouble events) e-mail is received, the body of the e-mail contains the information
entered in the “Job Details” section of the software (as shown below). If nothing is entered in the software, the body of the e-mail
will only indicate the events that occurred. The events are listed after the “Job Details” information. They are formatted with a
date/time stamp showing when the event occurred, event type, and the event description or the point information.
Figure 48. Example of Job Details in System Status E-mail
When a history status e-mail is received it contains two attachments:
• A text le (.txt)
• A comma separated values (.csv) le
Figure 49. Examples of a History text le (.txt) & History Comma Separated Value le
System e-mail communications and functions are intended for informational reporting purposes only. They are intended to be used as a
convenience function. E-mail communications should NOT be used as a primary means of reporting emergency information.
Job Details display here