2x shielded USB 2.0 cable, USB-mini B to USB-A,
used for camera connection, min 2 meters, goes to USB Hub
1x shielded USB 2.0 cable, USB-A to USB-B,
used for connecting the USB HUB with the PC
1x active USB Hub (runs with a Power Supply),
connects to the two USB cameras and the PC
1x Power Outlet Strip with minimum 6 outlets
used for 2x Printers, 2x DC Power Supply (Camera and Electronic Box),
1x USB Hub, 1x Ethernet Switch
3.4 Unpacking
Make sure all parts are available after unpacking the cases. Check the part list inside the shipment.
All packaged items must be inspected at the customer's site before unpacking begins. The following steps
are taken when there has been damage:
1.) Record the observations on the delivery documentation.
2.) Inform the carrier, shipping agent and insurance agent.
Units may be removed from their box only by an approved engineer or representative. Do not proceed with
unpacking when there has been a damage report until authorized by the shipping and insurance agents.
To Next Page
Loading...