Preproofer 770 - Mount Paper Guide Tube Front Printer

Paper Guide / Camera System
Add Paper Guide and Paper Tension Parts
9
Preproofer x700 / x900 – HW Installation Manual 9-15
PP x700/x900 v1.7
9.9.2 Mount Paper Guide Tube Front Printer
First mount the tube holder to the profile. Use the
inserted slot nuts and the M5 x 20 screws.
Put the paper guide tube into the holders right and
left.
Distance from the “side frame” to the “tube holders”,
measured from left side to left side is 425 mm.
Distance from the left “tube holder” to the right “tube
holder” is approx. 1205 mm.
Note:
The tube should rotate freely.
425 mm
Approx.1205 mm