Preproofer 770 - TOP Printer - Configure Custom Paper 1

Printer Panel Configuration
Parameter Setup TOP and BOTTOM printer
10
Preproofer x700 / x900 – HW Installation Manual 10-33
PP x700/x900 v1.7
Open the entry “Paper Skew Check” and select
“OFF”.
Open the entry “Refresh Margin” and select “ON”.
Open the entry “Auto Nozzle Check” and select
“OFF”.
10.1.1 TOP Printer - Configure Custom Paper 1
On the printer panel, go into the main “Menu” and
select “Paper Setup”.