97
Managing the Pegasus3Pegasus3 Product Manual
Locating a Physical Drive
This feature causes the drive carrier LEDs to blink for one minute to assist you in locating the physical
drive, and is supported by RAID enclosures and JBOD expansion units.
To locate a physical drive:
1. Click the Physical Drive icon.
2. Mouse-over the physical drive you want then click the Locate button.
The Drive Power / Status LED for the drive carrier holding that drive blinks blue and orange for
one minute.
Drive Power / Status LEDs
blink blue and orange
Running the Locate funcon to idenfy a physical drive
To Next Page
Loading...
