Promise Technology Vess R3600 Series User Manual

cache
Usage:
cache [-a <action>] -t <type> [-m <media type>] [-p <phydrv id list>]
[-i <pool id list>]
Summary:
The cache command allows the user to list cache info. To add or del read/write cache using SSD physical drive.
To modify SSD physical drives or to modify/remove assigned pools used in read/SSD write cache. As well as to
modify or remove assigned pools for Memory media type write cache.
Note that a pool can be assigned to either SSD or Memory media type write cache.
Options:
-a <action> Which action to perform.
list List cache info.
add Add read/write cache using SSD PDs.
At least 2 SSD PDs required for write cache.
mod Modify SSD PDs or assigned pools used for read/write cache.
del Delete read/write cache using SSD PDs.
remove Remove assigned pool(s) from cache.
-t < type> To specify type of cache.
read
write
-m <media type> To specify the media type of the write cache.
Only valid for -t write type.
ssd (Defaults)
memory
197
Promise Technology Managing with CLI

Promise Technology Vess R3600 Series Specifications

General

Model	Vess R3600 Series
Form Factor	2U Rackmount
RAID Levels	0, 1, 5, 6, 10, 50, 60
Drive Type	SAS/SATA
Cache Memory	8GB
Processor	Intel Xeon
Power Supply	Redundant 800W power supplies
Cooling	Hot-swappable redundant fans
Controller	Dual redundant controllers
Memory	Up to 64GB DDR4

Summary

Introduction and Product Overview

Features

Key capabilities and benefits of the Vess R3600/J3600 Series storage solutions.

Models and Specifications

Details of Vess R3600 and J3600 models, including interface and power specifications.

Hardware Overview

Summary of front and back panel hardware features of Vess R3600 and J3600 enclosures.

Hardware Installation

Unpacking and Packing List

Instructions for unpacking the Vess R3600/J3600 and contents of the product box.

Rack Mounting Procedures

Step-by-step guide for securely installing the Vess enclosure into an equipment rack.

Physical Drive Installation

Detailed instructions for installing physical disk drives into the enclosure's carriers.

System Configuration

Management Connections

Methods for establishing serial and network management connections for system administration.

Data Connections

Configuration steps for iSCSI and Fibre Channel data connections for storage access.

WebPAM PROe Configuration

Guide to accessing and using the WebPAM PROe interface for system setup and management.

NAS Account and Domain Management

Procedures for managing NAS users, groups, and network domain configurations.

Command Line Interface (CLI) Management

Table of Supported Commands

Reference list of available CLI commands with brief descriptions of their actions.

Notes and Conventions

Explanation of CLI syntax, options, and usage conventions.