Promise Technology Vess R3600 Series - Page 218

-p <phydrv id list> To specify physical drive IDs.
Only valid for -a add/mod action.
-i <pool id list> To specify assigned pool IDs. If not specied for adding cache, it means
no pool assigned. If not specied for -a remove action, it means to remove
all the assigned pools. Only valid for -a add/mod/remove action.
-v Verbose mode. Used with -a list.
cache
cache -a add -t read -p 1 -i 1
cache -a add -t write -p 1,2 -i 0
cache -a mod -t read -p 1,2 -i 1
cache -a mod -t write -m ssd -p 1,2 -i 0,1
cache -a mod -t write -m memory -i 3
cache -a remove -t read
cache -a remove -t write -m memory -i 3
cache -a remove -t write -m ssd
cache -a del -t read
cache -a del -t write
Examples
198
Promise Technology Vess R3600 / Vess J3600 Product Manual