syncmode= sync mode method.
async
semi-sync
sync (Default)
srcwwn= source subsystem wwn.It’s optional when start remote migrate.
dstwwn= destination subsystem wwn.It’s optional when start remote migrate.
-v Verbose mode. Used with -a list.
-y Enable non-interactive mode.
migrate
migrate -a start -i 1 -t local -p 0
migrate -a start -i 2 -t remote -p 0 -s “srcip=10.0.0.1, dstip=10.0.0.2”
migrate -a stop -i 1
migrate -a stop -t remote -i 1
Examples
238
Promise Technology
Vess R3600 / Vess J3600 Product Manual