Promise Technology Vess R3600 Series - Page 257

migrate
Usage
migrate [-a <action>] [-i <ID>] [-t <location>] [-p <pool ID>] [-s <settings>]
Summary
The migrate command allows the user to migrate volume into another pool which located in same subsystem
(Local) or other subsystem (Remote).
As well as to list or stop a specied migration.
Only with thin-provision disabled volume can be used to migrate. During migration in progress, source volume
cannot be expanded or removed; destination volume disallowed to do any operations.
Note: Snapshot and clone of source volume will not be migrated. They won’t be reserved after migration.
Options
-a <action> Which action to perform.
list (Default) Displays the migration in progress.
start Start a specic migration progress.
stop Stop the migration
-i <ID> Source volume ID.
-t <location> Destination location.
local (Default)
remote
-p <pool ID> Destination pool ID.
-s “<option>=<value>” Used to specify migration settings
srcip= Source portal IP
Only valid for -t remote specied.
dstip= Destination portal IP of remote subsystem.
Only valid for -t remote specied.
237
Promise Technology Managing with CLI