-t <source type> Specify source storage type for list or add periodic snapshot task.
nasshare
volume (Default for add.)
-d <source ids> Source storage IDs. Nasshare IDs or volume IDs. Valid for add/modify
action. For multiple value, divided by ‘,’ or ‘~’. Note that all the nasshares
or volumes must in the same pool.
-f Do not remove all the periodic snapshots generated by the task. Used
with -a del action.
-s “<option>=<value>” Used to specify periodic snapshot task settings.
status= Species status type of task.
enable
disable (Default)
recurtype= Species recurrence type of task.
daily (Default)
weekly
interval= Species the minutes between two snapshot copies.
This option is valid for Daily recurrence type.
The range is [5, 10, 15, 30, 60, 120, 240, 360, 480, 720, 1440].
Default is 60.
dow= Day of Week. This is for Weekly recurrence type task.
The range is [Sun|Mon|Tues|Wed|Thur|Fri|Sat].
For multiple value, divided by space.
Default is Sun.
253
Promise Technology
Managing with CLI
To Next Page
Loading...
Need help?
General
