Promise Technology Vess R3600 Series User Manual

Examples
ptiash -t -s 192.168.1.1 -f fw_multi.ptif -p 69 # for embedded
ptiash -f fw_multi_20031010.ptif # for in-band
ptiash -l # list currently running ash process
ptiash -t -s 192.168.1.1 -f fw_multi.ptif -n # for NDIU mode
ptiash -t -s 192.168.1.1 -f pd_fw.ptif -d 1,2
# update the pd rmware for pd 1 and 2 using the pd_fw.ptif image.
-e <encl id> Species the Enclosure ID.
Only used with -a versioninfo option.
If not specied, default value is all enclosures.
-i <ctrl id> Species the Controller ID.
Only used with -a versioninfo option.
Enclosure id is required when controller id is specied.
If not specied, default value is all controllers.
-v Verbose mode. Only used with -a versioninfo option. To show the version
and build information of all the ash images of all controllers or the
specied controller.
-n Start the ash process/image update in NDIU mode.
This mode is applicable only if the system is in redundant state.
Default mode of ash is DIU (disruptive) mode.
-d <device id> Species the physical drive IDs.
Only for physical drive rmware update.
If not specied, all the physical drives, which are supported by the
specied physical drive rmware, are selected.
-l Display the status of currently running ash process.
-y Enable non-interactive mode.
269
Promise Technology Managing with CLI

Promise Technology Vess R3600 Series Specifications

General

Brand	Promise Technology
Model	Vess R3600 Series
Category	Storage
Language	English