Promise Technology Vess R3600 Series User Manual

ptiash
Usage
ptiash [-a <action>] [-t] [-s <ServerIP>] -f <FileName> [-p <PortNum>]
[-e <encl id>] [-i <ctrl id>] [-n] [-d <pd id>] [-l] [-y] [-v]
Summary
This is the ash utility for the controller and physical drives. It is used to ash images such as rmware or
software for controllers and drive rmware image for physical drives. For embedded, in order to update the
ash image, the user must have a TFTP server setup that is accessible from the enclosure’s management port
and the ash image located on the TFTP server. For in-band, the ash image located on the local host must be
accessible.
Please note that only one ash process should be running at one time.
Options
-a <action> Which action to perform.
start (Default) To start the ash process.
versioninfo To get the version and build information of running images of all
controllers or the specied controller.
-t Indicates that TFTP get method is to be used to obtain the le from
a TFTP server.
-s <servername|ipaddress> Species the hostname or IP address of the TFTP server which contains
the image le.
-f <lename> Species the lename of the ash image. Include the folder name
A ash image could be either a controller ash image or a physical
drive rmware update image.
-p <port number> Species the port number of the TFTP server. If no port number is
given, the default value that will be used is 69.
268
Promise Technology Vess R3600 / Vess J3600 Product Manual

Promise Technology Vess R3600 Series Specifications

General

Brand	Promise Technology
Model	Vess R3600 Series
Category	Storage
Language	English