Examples
transit
transit -a start -l 0 -s 2 -p 10
transit -a stop -l 0 -s 2
trunk
Usage
trunk [-a <action>] [-i <trunk id>]
trunk -a add -s “<list of settings>”
Summary
The trunk command is used to display and modify port trunk settings for the iSCSI host interface.
Options
-a <action> Species the action to perform.
add Create a new trunk.
list Displays trunk information.
mod Modify an existing trunk setting.
del Delete a trunk.
-i [<trunk id>] Port trunk identier. (0 - 7).
-s [“<option>=<value>”] Used to specify which trunk settings to change.
ctrlid= Controller ID of Port
masterport= Master port of the Trunk. Range: Port ID
slaveport= List of ports aggregated in this trunk, excluding the master port
Range: Port ID.
299
Promise Technology
Managing with CLI
To Next Page
Loading...
Need help?
General
