trunktype= trunk type
balance_xor Transmits based on XOR formula. (Source MAC address is XOR’d
with destination MAC address) modula slave count. This selects the same
slave for each destination MAC address and provides load balancing and
fault tolerance.
lacp This mode is known as Dynamic Link Aggregation mode. It creates
aggregation groups that share the same speed and duplex settings. This
mode requires a switch that supports IEEE 802.3ad Dynamic link.
active_standby Only one slave in the bond isactive. A different slave becomes active if,
and only if, the active slave fails.
This mode provides fault tolerance.
trunk -a add -s”ctrlid=1,masterport=2,slaveport=3 4”
trunk -a del -i 2
Examples
300
Promise Technology
Vess R3600 / Vess J3600 Product Manual
To Next Page
Loading...
Need help?
General
