Once the correct ‘Date’ has been entered, press the ‘ENTER’ key. This will then prompt
for The correct ‘Year’ to be entered as follows:-
Once the correct ‘Year’ has been entered, press the ‘ENTER’ key. The display will then
return to the ‘Set date and Time’ menu option.
• Exiting option : The ‘Set date’ option can be Exited at any time by pressing the ‘ESC’ key. This will
return the screen to the ‘Set date and time’ menu options without updating the date.
Use the ← key to delete the old year
Then type the new year ( 00 ….. 99) .
To Next Page
Loading...
