PRÜFTECHNIK VIBXPERT II - Printing Out the Measurement Report

4-23
VIBXPERT II 05.2012
Reports
* only for balancing reports
Left:
Printing out the
measurement report
Right:
Measurement report
for the spectrum
<Edit>. The customer list appears.
• PresstheMENUkeyandclickon'New'.
• Enterthecustomerdatainthetexteditor.
inspector/asset: Information on the inspector/asset. Click in the cor-
responding text field to edit the information.
result file name: The result file name appears in the report.
report event: Report-specific event. Click in the text field to open the
event editor and select the event.
result event: Hereyoucanonlysetwhetherornoteventsshouldbe
printed.
setup info: Information on the measurement settings to be used. Three
options are available for selection:
- Standard: The name of the measurement and sensor setup is print-
ed.
- Standard + evaluation: Like Standard, plus evaluation setup or
machine setup*.
- Details:LikeStandard + evaluation, plus a screen printout of each
setup.
• Inthe‘Measureinfo’tab,selectthemeasurementtypeinformation
that is to appear in the measurement report (compare example on
previous page).
Printing out the measurement report
• Select the printer and the report conguration (‘Printer’ or ‘Re-
ports’ field).
• PresstheMENUkey.
• Clickon‘Print’(seebelow).
If you select 'PDF' as the printer, enter a file name.