PRÜFTECHNIK VIBXPERT II - Registering Optional Functions; Request the Password

6-6
VIBXPERT II 05.2012
Appendix - VIBXPERT utility
Registering optional functions
The following functions are optional and must be enabled by a pass-
word:
- Conversion of measurement files into formats that can be pro-
cessed by other analysis programs (UFF / IEEE)
- ExportresultsintoMSExcel.
Activate the 'Excel report' demo version
• ConnectVIBXPERTtothePCandperformaconnectiontest(see
next section).
• Clickonthe'Registration'buttontoopentheregistrationwindow.
• Clickon'GetSerial'.
• Assoonastheserialnumberappearsintheeldtotheright,click
‘Registerserial’.Thedemoversionisvalidfor30days.Ifyouwish
to use the module after that, you must request the password.
Request the password
• Entertheaddressdataintheregistrationwindow.
• Activatethedesiredfunctionandclickon'Requestregistration'.
• Inthenextscreen,checktheentriesandclickon'Print'toprintout
thedata.Sendtheprintouttothefollowingfaxnumber:
 +498999616300.
 TosendthedatatoPRÜFTECHNIKbyeMail,clickon'eMail'.
• ThepasswordwillbesenttoyoubyfaxoreMailwithinashort
period of time.
Enter the password
• Enterthepasswordintheregistrationwindow.
Registration
Left:
Activate Excel demo version
Enter / Request password
Right:
Send / Print data for registration