PRÜFTECHNIK VIBXPERT II User Manual

6-1
VIBXPERT II 05.2012
Chapter 6: Appendix
This chapter provides information on how to use
- the numerical and text editors,
- the VIBXPERT utility software,
- the File Manager
- the VIBCODE transducer system.
Instructions on handling and maintaining the VIBXPERT as well as the
technical data complete this chapter.
Numerical editor
The numerical editor appears each time it is necessary to enter a nu-
meric value (see below).
• To enter a numerical value, move the cursor over the character
field and click on the required digit.
• Todeletenumerals,presstheESCkey.Onlytheleftdigitofanum-
ber is deleted.
• Thesigncanbetoggledatanytimewith'±'inthecharactereld.
• Decimalplacesareenteredasaperiod'.'.
• Tosavethevalue,presstheMENUkeyandclickon'OK'.
Decimal places
Decimal places can only be entered if the 'Accuracy' of the respective
quantity is not set to zero (see the section on 'Units' in the device
setup,p.2-24).
Value range
The permissible value range is defined in the 'Maximum' / 'Minimum'
fields. If the value is outside of this range, the threshold that has been
exceeded is displayed with a black background. In this case, the en-
tered value cannot be saved.
Numerical Editor
Appendix - Editors

PRÜFTECHNIK VIBXPERT II Specifications

General

Brand	PRÜFTECHNIK
Model	VIBXPERT II
Category	Measuring Instruments
Language	English