PRÜFTECHNIK VIBXPERT II - Power Supply; Charging the Battery in the Device

2-7
VIBXPERT II 05.2012
Getting started - Power supply
Power supply
VIBXPERTissuppliedwithenergybyaLithium-Ionrechargeablebat-
tery. With the power on the the battery icon on the display indicates
the residual charge of the battery:

Note
VIBXPERT charger
VIB 5.320 INT
Follow the instructions for connection and disconnection of the
cableinthesection‘Interfaces’(page2-5).
The second free channel can in fact be used for measuring, but elec-
trical interference can lead to faulty measurements under certain
circumstances!
Battery icon
Residual charge 100%
Residual charge 25%
Battery is being charged
Battery almost empty
If the battery is almost empty, a message appears on the display and
theblueLEDashes.Thebatterycanbechargedeitherinthedevice
orintheexternalchargingstation(option,VIB5.324)usingtheVIBX-
PERTcharger(VIB5.320INT).
Follow the safety instructions enclosed with the charger.
Charging the battery in the device
Connect the charger to one of the two analog input channels (A / B).
VIBXPERT can be operated during charging.
Attention!