PRÜFTECHNIK VIBXPERT II User Manual

2-37
VIBXPERT II 05.2012
Getting started - Update
Update
The current device software for VIBXPERT can be downloaded from
thePRÜFTECHNIKhomepage*intheInternet.
The update file is compressed in a ZIP archive that first has to be un-
packed after it is downloaded to your PC. It is recommended to load
thesoftwareupdateontothedeviceviaEthernetorUSBbecausethe
serial connection is slower.
Before an update ...
... backup the measurement data in VIBXPERT to the OMNITREND
database.
... connect the VIBXPERT to the mains supply. Otherwise, the up-
date procedure will not start.
• Installthe'VIBXPERTupdatetool'onthePC.Theprogramisavail-
ableonthePRÜFTECHNIKConditionMonitoringCD.
• ConnectVIBXPERTtothenetwork/thePC.
• SwitchonVIBXPERT.
• Startthe'VIBXPERTupdatetool'*onthePCandclickon<Next>
tocallup'Step2':
• Setthe‘Communicationtype’to‘Ethernet’(or'USB').
• EntertheIPaddressoftheVIBXPERT.
• Clickon<Next>:
*http://www.pruftechnik.com
* Alternatively, the VIBXPERT Update
tool can also be started using the 'VIBX-
PERT utility' tool (see p. 6-5ff.)
Attention!

PRÜFTECHNIK VIBXPERT II Specifications

General

Brand	PRÜFTECHNIK
Model	VIBXPERT II
Category	Measuring Instruments
Language	English