PRÜFTECHNIK VIBXPERT II - Charging in the External Charging Station

2-8
VIBXPERT II 05.2012
Attention!
During extended periods of non-use and during storage, connect
VIBXPERT regularly to the mains supply. This prevents the battery
from becoming completely discharged, and the date and time settings
are retained.
• Donotusedamagedbatteries!
• Donotsendbackdamagedbatteries!
• Donotuseforcetoopenthebatteryorthrowitinthere!
• Donotshort-circuitconnectioncontacts!
• Maximumchargetemperature:40°C.
• Dispose of used batteries properly in accordance with regula-
tions(P.6-17).
Getting started - Power supply
Charging in the external charging station
To remove the battery, loosen both screws on the back.
The metal contacts on the battery, in the charging station and in the
device should be protected against contamination and inadvertent
contact!
Attention!
Charging socket
LEDs for charge status
(see page 2-2)
VIBXPERT charging station
VIB 5.324
Remove the battery