PRÜFTECHNIK VIBXPERT II - Registration; VIBXPERT PC License

2-24
VIBXPERT II 05.2012
Getting started - Basic settings
Left:
Registration menu
Right:
Units menu
The VIBXPERT PC license automates the
device registration process in OMNI-
TREND.
Registration
The functions and operating modes in VIBXPERT are distributed in
individual modules* that can be enabled by password as required.
VIBXPERT is supplied in the 'Basic' version with which overall values
as well as (limited) spectra can be measured. For example, to enable
the standard 1-channel version, the 'VIBXPERT firmware for 1 chan-
nel' module must be registered in VIBXPERT. The corresponding pass-
word can be found on the associated registration certificate:
• Clickon'Registration'.
• Clickonthemoduletoberegisteredandenterthepasswordinthe
text editor.
VIBXPERT PC license
Before VIBXPERT can exchange data with OMNITREND, the device
must be registered in OMNITREND. This is generally performed by
entering the PC license password in OMNITREND.
HereyoucanenterthepasswordinVIBXPERT.Thepasswordisthen
automatically read into OMNITREND when VIBXPERT first makes
contact with OMNITREND.
Units
Theunits-whereappropriate-aresettoSIunitsinthefactory.To
change the unit for the respective measurement quantities, proceed
as follows:
• Clickon'Units'.
• Selecttheunitsforthemeasurementquantities.
The accuracy in decimal places appears in the lower area of the win-
dow for the current unit as well as the conversion factor for the asso-
ciatedSIunit.Itisnotyetpossibletodene,deleteoreditunits.The
number of decimal places can not be changed.
To accept the settings, press MENU and click on 'OK'.
*The attachment on page 6-20 contains
an overview of the modules and the
available measurement functions.