PRÜFTECHNIK VIBXPERT II - Measuring with a Machine Template

To Next Page

To Previous Page

3-13

VIBXPERT II 05.2012

Measurement - Machine template

Measuring with a machine template

A 'Machine template' is used if it is necessary to carry out measure-

ments on machines of the same type. The measurement locations are

always at the same position and the measurement tasks are identical

for each machine. Typical applications are service measurements or

acceptance measurements (production tests) on-site at a machine

manufacturer's. Machine templates are created with the aid of the

OMNITREND PC software.

Select measurement location

navigation via tree view (see left),

list view or machine graphic

Enter machine code

(name, serial number, ...)

The following diagram shows the typical workﬂow of a measurement:

Select operating mode

Select measurement task,

start measurement

Save measurement result

Select nxext measurement task

Select template

Save

Other manuals for PRÜFTECHNIK VIBXPERT II