PRÜFTECHNIK VIBXPERT II - Basic Settings - Device Setup

2-12
VIBXPERT II 05.2012
Basic settings - Device Setup
Before carrying out measurements with VIBXPERT, the basic settings
inthe'DeviceSetup'shouldbecheckedandchangedifnecessary.
• SwitchonVIBXPERT.
• Clickon'DeviceSetup'inthestartscreen.The'DeviceSetup'screen
appears.
Date & Time
The time and date are saved together with the measurement result.
To change the settings:
• Clickon'Date&Time'.
• Clickinthe'Time'windowandselectthenumeralsforthehours,
minutes or seconds.
• Tochangethenumericvalue,pressthenavigationkeyupordown.
• Whennishedclickonthe'Enter'keytoleavethe'Time'window.
• Selectthe'Timeformat':
 HH:mm:ss=24h/hh:mm:ssAP=12h
• Thedateissetinthesameway.Selecttheappropriate'Datefor-
mat'.
Other parameters
Timezone:  TimeshifttoGMT(GreenwichMeanTime)
Daylight saving: Yes = + 1h
• Toacceptthechanges,pressMENUandclickon'OK'.
Getting started - Basic settings
Left:
Basic settings in the Device Setup
Right:
Time and Date