PRÜFTECHNIK VIBXPERT II - Exporting Measurement Data in MS Excel Format

4-26
VIBXPERT II 05.2012
Exporting measurement data in MS Excel format
- Exportable measurement data:
Overall value, FFT spectrum, balancing result, time waveform,
coast-down measurement (amplitude phase and overall value),
2-channel measurements
- Compatibleversion:MSExcel2003,MSExcel2007
• Connect VIBXPERT to the PC.
• StarttheVIBXPERTUtilityProgramandregisterthereportmod-
ule(seep.6-5f.).
• In the utility startup screen, click ‘Transfer les’ and then ‘CSV
Export’.
• Mark the measurement file and click ‘Export *.xls’.
ThemeasurementdataarethenexportedandtheMSExcelprogram
is started. The report templates contain macros, which normally are
blocked by the program at first.
• In the security warning, click ‘Options’ and activate the option
‘Activate this content’.
Excel then displays the measurement data on two worksheets:
1st worksheet: Displays the master data for the measurement and the
measurement diagram.
2nd worksheet: Contains the readings in table form
The generated Excel les are based on templates, which can be
adapted as necessary by a user with the corresponding skills.
Below:
Measurement data in Excel format
Reports