Quantum Scalar i40 User Manual

Chapter 4: Configuring the Library
Working With LDAP User Accounts (Remote Authentication)
92 Quantum Scalar i40 and Scalar i80 User’s Guide
• User DN — The Fully Qualified Distinguished Name that contains
the users.
For an example, see Figure 14 on page 93
• Group DN — The Fully Qualified Distinguished Name that
contains the groups.
For an example, see Figure 14 on page 93
• Library User Group — The name of the group on the LDAP server
associated with library users who have user-level privileges (see
Privilege Levels on page 81 for more information on user
privilege levels). This group must exist on your LDAP server (see
LDAP Server Guidelines on page 89).
For an example, see Figure 14 on page 93
• Library Admin Group — The name of the group on the LDAP
server associated with library users who have administrator-level
privileges (see
Privilege Levels on page 81 for more information
on user privilege levels). This group must exist on your LDAP
server (see
LDAP Server Guidelines on page 89).
For an example, see Figure 14 on page 93
A sample of a completed dialog box is depicted below:

Quantum Scalar i40 Specifications

General

Power requirements	100 - 240 V AC, 50 - 60 Hz, 2.8/1.4 Amps
Power consumption (typical)	100 W
Expansion slots	25
Dimensions (WxDxH)	455 x 793 x 132 mm
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Media type	Tape Cartridge
Product type	Storage auto loader & library
Product color	Black

Weight and Dimensions

Weight	15800 g