Quantum Scalar i40 - Returning to Default Home Screen

Chapter 4: Configuring the Library
Changing Operator Panel Home Screen View
110 Quantum Scalar i40 and Scalar i80 User’s Guide
Unlocking the I/E is described in Unlocking and Opening the I/E Station
on page 145.
Returning to Default
Home Screen
1 From the alternate home screen, select Menu to return to the
default home screen.
The default home screen is displayed temporarily, however upon
power cycle will display the alternate home screen until reset
permanently.
2 To reset to view the default home screen permanently, select
Setup > System Settings and press Select.
3 Select Alternate Home and press Modify.
4 Select Down and press Apply.
Select Exit twice to return to the default home screen.