Chapter 9: Installing, Removing, and Replacing Components
Installing the Library in a Desktop Kit
244 Quantum Scalar i40 and Scalar i80 User’s Guide
4 Remove all the tape drives from the library (for details, see
Removing and Replacing a Tape Drive on page 286).
5 Remove all the magazines from the library (for details, see Removing
and Replacing a Magazine on page 271).
6 Unscrew the captive thumbscrews in the “rack ears” that secure the
library to the rack (see
Figure 51 on page 243).
7 Slide the library out of the rack. Keep the library level as you slide it
out of the rack.
8 Place the library on a flat, stable surface.
Installing the Library in a Desktop Kit
The instructions for installing the Scalar i40 and the Scalar i80 in a
desktop are the same. The only difference is that the Scalar i40 has two
side panels, and the Scalar i80 has four.
To Next Page
Loading...
