Quantum Scalar i40 - Setting the Session Timeout

Chapter 4: Configuring the Library
Setting the Session Timeout
Quantum Scalar i40 and Scalar i80 User’s Guide 97
For example:
ktpass‐outlibrary.keytab‐princlibrary/
delos.dvt.mycompany.com@OURREALM.LOCAL
+rndPass‐ptypeKRB5_NT_SRV_HST‐cryptoRC4‐
HMAC‐NT‐mapUserourrealm.local/computers/
kerbtest
• For Windows 2008:
ktpass‐outlibrary.keytab‐princlibrary/
<fqdnoflibrary>@<realm>
+rndPass‐ptypeKRB5_NT_SRV_HST‐cryptoAES256‐
SHA1
‐mapUser<realm>/computers/<computeraccount>
For example:
ktpass‐outlibrary.keytab‐princlibrary/
delos.dvt.mycompany.com@OURREALM.LOCAL
+rndPass‐ptypeKRB5_NT_SRV_HST‐cryptoAES256‐
SHA1
‐mapUserourrealm.local/computers/kerbtest
Setting the Session Timeout
The library automatically logs out a user or administrator when the
library has detected no activity for a specified length of time. This
always occurs on the Web client, and will occur on the operator panel if
passwords are enabled (see
Enabling and Creating Passwords on the
Operator Panel on page 84). The default session timeout is 15 minutes.
You can change that to 30, 45, or 60 minutes. You can only change this
setting on the operator panel.