Quantum Scalar i40 and Scalar i80 User’s Guide 299
Chapter 10
Updating Firmware
This chapter covers updating library and tape drive firmware, including:
• Updating Library Firmware
• Updating and Autoleveling Tape Drive Firmware
• About Tape Drive Firmware Autoleveling
• Uploading Tape Drive Firmware Used in Autoleveling
• Deleting Tape Drive Firmware Used in Autoleveling
• Initiating Tape Drive Firmware Autoleveling
Updating Library Firmware
The library firmware update operation allows you to update library
firmware using the Web client. With the library firmware update
operation, you can upgrade firmware to a later version or downgrade
firmware to an earlier version. Upgrading library firmware can take up
to 30 minutes.
To Next Page
Loading...
