Quantum Scalar i40 User Manual

Quantum Scalar i40 and Scalar i80 User’s Guide 335
Chapter 12
Working With Cartridges
and Barcodes
This chapter describes how to work with cartridges and barcodes. When
working with tape cartridges, certain considerations should be taken
into account. For example, all tape cartridges in the library must have a
barcode label. In addition, when loading your library, you should be
aware of whether or not your cartridges are write-protected.
This section discusses these types of items in general terms. See
Supported Media on page 347 for information on what type of tape
cartridges are supported for each drive type.
This chapter covers:
• Handling Tape Cartridges Properly
• Write-Protecting Tape Cartridges
• Supported Barcode Formats
• Barcode Label Requirements
• Installing Barcode Labels

Quantum Scalar i40 Specifications

General

Power requirements	100 - 240 V AC, 50 - 60 Hz, 2.8/1.4 Amps
Power consumption (typical)	100 W
Expansion slots	25
Dimensions (WxDxH)	455 x 793 x 132 mm
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Media type	Tape Cartridge
Product type	Storage auto loader & library
Product color	Black

Weight and Dimensions

Weight	15800 g