Quantum Scalar i40 User Manual

Quantum Scalar i40 and Scalar i80 User’s Guide 225
Chapter 9
Installing, Removing, and
Replacing Components
This chapter describes how to add, remove, and replace hardware
components within your library.
WARNING: Two people are required to lift and install the library.
WARNING: Under no circumstances should a rack be moved while a
library is installed.
This chapter covers:
• Taking ESD Precautions
• Connecting Library Cables
• Installing the Rack Mount Kit (Rail Kit)
• Installing the Library In a Rack
• Removing the Library From a Rack
• Installing the Library in a Desktop Kit
• Removing the Library from a Desktop Kit
• Removing and Replacing the Front Bezel
• Replacing the Chassis
• Removing and Installing a Filler Plate

Quantum Scalar i40 Specifications

General

Power requirements	100 - 240 V AC, 50 - 60 Hz, 2.8/1.4 Amps
Power consumption (typical)	100 W
Expansion slots	25
Dimensions (WxDxH)	455 x 793 x 132 mm
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Media type	Tape Cartridge
Product type	Storage auto loader & library
Product color	Black

Weight and Dimensions

Weight	15800 g