Quantum Scalar i40 User Manual

Chapter 9: Installing, Removing, and Replacing Components
Installing the Rack Mount Kit (Rail Kit)
Quantum Scalar i40 and Scalar i80 User’s Guide 237
2 Install the left and right rack mount shelves into the rack (the rack
mount shelves adjust 24 to 36 in.) and secure with the following
parts in four locations (see
Figure 47 on page 238):
• 2 washers
• 2 M4 x 12 screws
Note: The rack mount shelves must be installed on the inside rack
rails.

Quantum Scalar i40 Specifications

General

Power requirements	100 - 240 V AC, 50 - 60 Hz, 2.8/1.4 Amps
Power consumption (typical)	100 W
Expansion slots	25
Dimensions (WxDxH)	455 x 793 x 132 mm
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Media type	Tape Cartridge
Product type	Storage auto loader & library
Product color	Black

Weight and Dimensions

Weight	15800 g