R&S FPC Series - Page 242

Remote Control
R&S
®
FPC
239User Manual 1178.4130.02 ─ 07
Prerequisites for this command
●
Turn on TOI measurement (CALCulate<n>:MARKer<n>:FUNCtion:TOI[:
STATe]).
Suffix:
<n>, <m>
.
irrelevant
Return values:
<TOI> <numeric value>
Default unit: dBm
Example: //Query TOI result
CALC:MARK:FUNC:TOI ON
CALC:MARK:FUNC:TOI:SEAR
CALC:MARK:FUNC:TOI:RES?
Usage: Query only
Manual operation: See "Marker <x>" on page 363
CALCulate<n>:MARKer<m>:FUNCtion:TOI:SEARchsignal
<Once>
This command searches for signals to determine the TOI.
Prerequisites for this command
●
Turn on TOI measurement (CALCulate<n>:MARKer<n>:FUNCtion:TOI[:
STATe]).
Suffix:
<n>, <m>
.
irrelevant
Setting parameters:
<Once> ONCE
Example: //Search for signals
CALC:MARK:FUNC:TOI ON
CALC:MARK:FUNC:TOI:SEAR
Usage: Setting only
Manual operation: See "Search Signals" on page 362
CALCulate<n>:MARKer<n>:FUNCtion:TOI[:STATe] <State>
This command turns the third order intermodulation measurement on and off.
Suffix:
<n>, <m>
.
irrelevant
Remote Commands of the Spectrum Application