SECTION 19: ELECTRICAL
75 of 154
SECTION 19: ELECTRICAL
Each air handler is equipped with a wiring diagram
which will vary depending on the type of remote
panel and/or options supplied.
Air handlers can also be supplied as building
management system (BMS)-ready. In this case, a
remote panel is not supplied.
Note: Spark testing or shorting of the control wires
by any means will render the transformers
inoperative.
Each unit is equ ipped with a fused rotary disconnect.
The rotary disconnects are for copper wire only.
DANGER
Electrical Shock Hazard
Disconnect electric before service.
More than one disconnect switch may be
required to disconnect electric from
equipment.
Equipment must be properly grounded.
Failure to follow these instructions can result
in death or electrical shock.
To Next Page
Loading...
