5
Manual No. 016-3001-015 Rev. C 91
Using the OmniSeed Viper Pro System
3. The Select Field screen will be displayed.
Select the Grower, Farm and Field to use for the job.
Note: Select the Order by Nearest option at the top of the screen to display pre-populated jobs closest
to the current vehicle location at the top of each list.
To view a complete list of recommendations stored on the Viper Pro, select the Show All option. A
list of recommendations currently stored on the field computer will be displayed.
4. Once a field has been selected, a field boundary for the selected field will be displayed in the map preview
display. Use the zoom and vehicle lock icons below the preview to adjust the map display if necessary.
To Next Page
Loading...
