Chapter 11
222 OmniSeed™ Viper Pro™ Installation & Operation Manual
Automatic File Maintenance
Note:
Do not use the Automatic File Maintenance feature to create reports for a Slingshot
account.
The Automatic File Maintenance feature does not export the types to a USB flash drive necessary
for creating Slingshot reports and will remove job data from the Viper Pro. Job data transferred
using the Automatic File Maintenance feature cannot be reinstalled onto the field computer for
export to Slingshot. Refer to the USB File Transfer and Advanced File Maintenance section on
page 219 for instructions on outputting the necessary file types.
The automatic file maintenance feature will automatically perform the following steps:
1. Move all report files to the USB drive.
2. Delete all existing job files from Viper Pro internal storage.
Note: All field boundaries, saved A-B lines, automatic section control templates, street and prescription
maps will be maintained on the internal storage.
To perform automatic File Maintenance:
1. Touch Menu on the main screen.
2. Select File Maint. from the list of menu options.
3. Select Automatic File Maintenance from the list of file maintenance options. The following warning screen
will display.
Touch OK to download the report files from the Viper Pro internal storage and delete associated job files from
the Viper Pro or Cancel to abort the downloading of report files.
To Next Page
Loading...
