Chapter 5
114 OmniSeed™ Viper Pro™ Installation & Operation Manual
4. Select a file from the list and touch OK. The Viper Pro will import a compatible shapefile into the job in
progress.
Tally Registers
The tally registers feature of the Viper Pro may be used to track area and volume totals over the course of a
field application or over the course of an application season.
To view or reset current tally totals from the Viper Pro main screen:
1. Touch the Product Control area at the bottom of the main screen.
2. Touch the Tally Registers button at the bottom of the CAN Controller Status screen.
To Next Page
Loading...
