Raven OmniSeed Viper Pro - Chapter 9 Remote Calibration Console

Manual No. 016-3001-015 Rev. C ix
Calibration Reference Sheet
Record the settings and calibration values used when programming the field computer and keep this sheet for
future reference or when contacting a service technician.
Circle the setting selected on the field computer for the following options:
Write down the selected settings for each configured control channel in the spaces provided:
Write down the calculated calibration values in the spaces provided.
Units
US (Acres) SI (Hectares) Turf (1000 Square Feet)
Speed
Sensor
SP1 (Wheel Speed) SP2 (Radar)
Speed Cal
Control Channel
1
Control Channel
2
Control Channel
3
Control Channel
4
Control Channel
5
Control
Type
Valve Type
Control Channel
6
Control Channel
7
Control Channel
8
Control Channel
9
Control Channel
10
Control
Type
Valve Type
Section Widths
(Boom Cal)
Meter Cal Rate Cal Valve Cal Cal Weight
Volume in
Tank/Bin
1. 1. 1. 1. 1. 1.
2. 2. 2. 2. 2. 2.
3. 3. 3. 3. 3. 3.
4. 4. 4. 4. 4. 4.
5. 5. 5. 5. 5. 5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.