CHAPTER
7
Manual No. 016-3001-015 Rev. C 139
C hapter 7
Advanced Settings
and Features
Overview
This chapter contains descriptions of advanced settings and features available when controlling a CANbus
product control system with the Viper Pro field computer.
The following settings and features are not required for operation of the Viper Pro system and are intended to
assist with various operations using the Viper Pro field computer.
Advanced Product Control Settings and
Features
Additional settings and features may be configured to help the operator monitor and control application of
products during an actual job. This section provides details on the settings available through the CAN
Controller Status screen when the Viper Pro is configured as the CANbus controller.
The following settings and features are accessible through the CAN Controller Status screen:
• Boom or implement section assignments
• Miscellaneous settings and node version information
• Feature and alarm settings
• Product control settings
• Pressure display and calibration
• Application and control valve type selection
To Next Page
Loading...
