Chapter 4
84 OmniSeed™ Viper Pro™ Installation & Operation Manual
Controller Status Screen
Touch the Product Control Status indicator at the bottom of the main screen to view the Controller Status
screen.
The Controller Status screen displays information from the product rate controller or a CANbus control system.
Controller Status
When connected to a separate product rate control console, the Viper Pro Controller Status screen displays
boom section and product rate information provided by the rate controller. Refer to the Raven Viper Pro
Installation and Operation Manual for more information about using the Viper Pro field computer with an
external rate control console.
CAN Controller Status
While operating in OmniSeed and controlling seeding operations over a CAN network, the current control
settings for each product node or control channel are displayed on the CAN Controller Status screen.
The following information areas display on the CAN Controller Status screen:
• The Section Cals Area displays an overview of the current boom section widths and mapped display
characters. Review the Initial Set Up section on page 37 for details on configuring the boom or implement.
Refer to Section Assignments section on page 140 for more information on assigning products to specific
sections.
Section Cals
Area
Features
Settings Area
Product
Application
Settings Area
Pressure Area Application and
Valve Type
Miscellaneous
Settings Area
Tally Registers and
CAN Profiles
Fan RPM
Display
Current Alarms
To Next Page
Loading...
