Chapter 11
214 OmniSeed™ Viper Pro™ Installation & Operation Manual
Flash Drive File Structure
The USB flash drive will be populated with the following file folder structure.
Note: If the USB flash drive was initialized with an older version of software, an Rbin folder may also be
available. This folder would contain any Rbin files from the Viper Pro. This file is not used with
newer software versions and may be deleted if desired. Verify that the Rbin folder is empty before
deleting the folder.
RDE Folder
The RDE Inbox folder contains AgX job and recommendation files for transfer between the Viper Pro and a
home or office PC.
Note: Do not remove, rename or overwrite any job files stored in the RDE folder or sub-folders.
Modifying these files will cause errors with the AgX job features on the Viper Pro field computer.
The RDE Outbox folder will contain any .jdp (job data package) files for upload to the Slingshot web service.
Viper Folder
The viper folder contains the job and miscellaneous folders which contain files used by the Viper Pro
Jobs Folder
The jobs folder will initially be empty. This folder will contain job related information downloaded from the Viper
Pro. These files contain all information associated with a specific job and may be archived on a home or office
PC for future use.
Misc Folder Sub-folders
The misc folder contains job reports and files which are not job specific. Several sub-folders are contained in
the misc folder to help organize this information. The following information is contained in the sub-folders.
AccuBoom Sub-folder. The AccuBoom sub-folder can be used to upload or download no-apply zone
templates that have been set up for specific fields. Once these templates are transferred to the Viper Pro,
they can be used when starting a new job in the selected field.
To Next Page
Loading...
Need help?
General
