2
Manual No. 016-3001-015 Rev. C 9
Introduction
Rear Panel
The following is a brief introduction to the ports and connectors available on the back of the Viper Pro field
computer.
The rear panel offers additional USB ports as well as an ethernet port for wireless capabilities using an optional
Slingshot Field Hub.
FIGURE 4. Viper Pro Rear Panel
The main and auxiliary interface connectors are also located on the back of the Viper Pro.
The field computer part and serial numbers, and revision letter, are printed on the tag located on the back of
the field computer. Please have this information available when contacting customer support.
CAUTION
Damage to the field computer may occur if the
USB ports are used to charge mobile devices
such as cellular phones, tablets, or mp3
devices. The USB ports should only be used for
performing file transfer and maintenance.
Mounting Posts and
Built-In Bracket
Clamps
USB Ports
Ethernet Port
Main Interface
Connector
Auxiliary Interface
Connector
To Next Page
Loading...
