CHAPTER
9
Manual No. 016-3001-015 Rev. C 197
C hapter 9
Remote Calibration
Console
Overview and Connection
The optional tank calibration kit (P/N 117-0171-302) allows the operator to perform all the necessary calibration
operations from the air cart making calibration of the OmniSeed system quick and convenient. The remote tank
console allows the operator to prime metering rollers and perform the catch test while watching the air cart
operation which can help the operator make correct system adjustments prior to starting a seeding operation in
a field.
Note: When performing calibration with the remote tank console, power up the Viper Pro and select the
Display Program List option when prompted. The Viper Pro should remain on the Program Menu
Selection screen while using the remote tank console. To display the Program Menu Selection
screen from the Viper Pro main screen, touch Menu, Exit and then select the Exit to Menu option.
The tank calibration kit requires a hydraulic drive system to connect the remote tank console.
Kit Contents
TABLE 1. Remote Tank Calibration Kit (P/N 117-0171-302)
WARNING
The metering rollers will turn during the
calibration procedure. Keep away from moving
components when performing a catch test using
the remote tank console.
Be aware of bystanders and alert anyone
around the air cart when performing the
calibration process.
Part/Description Part Number
Console, Remote Tank 063-3001-004
Cable, Remote Tank Calibrator 115-3001-039
To Next Page
Loading...
