Raven OmniSeed Viper Pro - Assign Recommendations to Product Channels

Chapter 5
92 OmniSeed™ Viper Pro™ Installation & Operation Manual
5. When the correct recommendation is selected, touch the Next button to display the Assign
Recommendation to Channel screen.
This screen displays the available control channels and any recommendations available for the selected
field.
For instructions on completing the job set up process, continue to the Assign Recommendations to Product
Channels section on page 92.
Assign Recommendations to Product Channels
Selecting Control Channels
The channel indicators display the currently selected channel and which channels are enabled or disabled
for the job. The channel indicators will display as follows:
• Green - Currently selected channel. Touching any channel indicator once selects the channel
and enables the channel for the job. Touch the green channel indicator again to disable the
selected channel for the job.
• Dark - Channel is enabled.
• Light - Channel is disabled.
1. Touch the channel to which a recommendation will be applied.