Raven OmniSeed Viper Pro - Screen Icons; A-B Lines

6
Manual No. 016-3001-015 Rev. C 133
Viper Pro Guidance
ReCal A-B Button
When using the Straight (A-B) Line guidance pattern, touch the Guidance Menu icon to access the Recal A-B
button. Touch the Recal A-B button to recalibrate the displayed A-B line to the current machine location.
Reset A-B Button
When using the Straight (A-B) Line guidance pattern, touch the Guidance Menu icon to access the Reset A-B
button. Select the Reset A-B button to clear the current A-B guidance points and set new points without closing
the current job.
Screen Icons
The following screen icons appear on the Guidance screen.
A-B Lines
The straight A-B and fixed contour guidance patterns allow the operator to set a swath guidance based upon
the first pass driven. This A-B line can be saved for later use.
Note: Multiple A-B lines may be saved per job. When saving lines, use unique names to help distinguish
each line from other saved A-B lines.
Icon
Name
Description
Icon
Name
Description
Guidance Menu Icon: Touch this icon to
view the available options for the current
guidance path.
Zoom Out: Touch the icon to zoom the
current display area out.
Straight A-B Pattern: Touch this icon to
switch to the Straight A-B pattern.
Zoom In: Touch this icon to zoom the
current display area in.
Last Pass Pattern: Touch this icon to
switch to the Last Pass pattern.
Increase Brightness: Touch this icon to
increase the brightness of an external light
bar.
Pivot Pattern: Touch this icon to switch to
the Pivot pattern.
Decrease Brightness: Touch this icon to
decrease the brightness of an external light
bar.
Vehicle Icon: The tip of the arrow
indicates the antenna position and current
vehicle location in reference to the swath
path, field area, etc.
Bird's Eye View: Touch this icon to switch
to the ‘Bird’s Eye View’ or view looking
down on the current machine location.
Down Field View: Touch this icon to
switch to the ‘Down Field View’ or a view
from the vehicle cab.