4
Manual No. 016-3001-015 Rev. C 83
Initial Set Up and Navigation
Seed Blockage Sensors
If an optional seed blockage sensor system is connected to the field computer, the status of the air system will
be displayed at the bottom of the screen.
Refer to Chapter 10, Seed Blockage Sensors, for details on set up and operation of the seed blockage system
with the OmniSeed Viper Pro.
Menu
Various configuration and feature settings for the Viper Pro control system are accessible via the ‘Menu’ button
in the lower, right corner of the Viper Pro display.
Access the menu to:
Note: Refer to Menu section on page 163 for details on the settings, features and options accessible
through the main screen menu button.
• Exit or Restart the Viper Pro application or shutdown the field computer
• View field computer software and hardware version information
• Access the internet (if a wireless access device is connected and properly configured)
• Setup the following control and feature items:
• Registration or authorization keys for optional Viper Pro features
• Map settings such as prescription (Rx) map colors, loading street maps (if available) and
adjusting coverage and scout map displays
• Display Language and Units, time zone settings and machine profiles
• Communication port settings
• Product control settings
• Light bar settings
• Boom configuration and settings
• File maintenance processes
• Begin or resume jobs or machine guidance
To Next Page
Loading...
