Chapter 7
148 OmniSeed™ Viper Pro™ Installation & Operation Manual
To modify the feature or alarm settings for the above features, touch within the feature settings area on the
CAN Controller Status screen.
Note: Before changing any of the feature or alarm settings, be sure to select the correct product node or
control channel by touching the corresponding radio button displayed at the top of the feature
settings area.
Node Feature Settings Screen (Page 1)
Touch within the Feature Settings area to view the first screen of settings for the selected product node or
control channel.
Note: Touch the Next button to access additional alarm and feature settings for the selected product
node or control channel.
Dual Flow %/FER Cal. The dual flow percent feature is only used when controlling a chemical injection or
Granular 3 application.
Note: The default value for the dual flow percent in either a chemical injection or dual bed system is 50.
Status Screen Example
(Liquid)
To Next Page
Loading...
