Chapter 11
220 OmniSeed™ Viper Pro™ Installation & Operation Manual
Selecting an Operation to Perform
5. Once the type of file is selected, the Select Operation to Perform selection displays. Select:
• Copy - Makes a copy of the selected file on the destination storage location. Copied file is
retained on the source storage location.
• Delete - Deletes the selected files from the source storage location.
• Move - Move the file from the source storage location to the destination storage location. The
selected file on the source storage location is deleted.
• Export - Select the export option to transfer a job data package .zip file to the connected USB
flash drive. The file will be transferred to the RDE Outbox folder and may then be transferred to
the Slingshot web site via a home or office PC.
Note: The Export operation will only be available with job files.
Selecting Source/Destination
6. Select the source location of the files on which the selected operation will be performed. For the Copy and
Move operations, the destination is also listed.
Selecting Associated File Actions
7. Some file types may be associated with a job file on the Viper Pro. If job files will be deleted, the operator
must choose what action to perform on files associated with the job file being deleted.
Note: Deleting job files is the only condition which associated file actions must be selected.
To Next Page
Loading...
