Ricoh A2 - Page 71

Item Description
Default Gateway A gateway address for the RC Gate. You can specify this
setting only if DHCP is set to [OFF].
Current IPv4 Address Displays the current IPv4 address.
[LAN Port] - [IPv6 Setting]
Item Description
Use IPv6 Settings Select whether or not to use IPv6 server.
DHCP v6 Select whether or not to use DHCP v6 server.
IPv6 Address An IPv6 address for the RC Gate (LAN port).
You can Enter it when DHCP v6 is set to [Off].
IPv6 Default Gateway Address A gateway address for the RC Gate (LAN port).
Current IPv6 Address Displays the current IPv6 address.
[LAN Port] - [DNS Server]
Item Description
Primary DNS Server Enter the IP address of the DNS server which the RC Gate
mainly uses. Enter the IP address in "x.x.x.x" format ("x" stands
for a number from 0 to 255). You may enter the IPv6
address.
Secondary DNS Server Enter the IP address of a secondary DNS server to use a
secondary DNS server when a primary DNS server cannot
be used for some reason. Enter the IP address in "x.x.x.x"
format ("x" stands for a number from 0 to 255). You may
enter the IPv6 address.
Current Primary DNS Server Displays the current primary DNS server address.
Current Secondary DNS Server Displays the current secondary DNS server address.
Maintenance Port
This setting can be accessed only at the initial setting.
System Settings
69